SMAT 3 H44-62mm

Metallic support SMAT
Metallic support for raised floors, height adjustable, with self-leveling head compensating slopes up to 5%. The raised floor supports consist of a square foot in approximately 100x100 x 1.8 mm format and a screw made of a threaded piece, to the end of which a concave element is attached, serving as a seat for the head.

The self-leveling head is equipped with special perforated fins to receive and fix the rails and a locking ring. Height adjustment from 27mm to 458 mm is done manually by turning the thread.

TECHNICAL SPECIFICATION
Height adjustable stool bearing, with self-leveling, for raised floors made of metal rails & wooden beams. The supports consist of a square support foot 100x100 mm, thickness 1.8 mm; a screw that consists in the end of a threaded rod to which a concave element is attached, this serves as a pivot point and support for the pivot head; The stool bearing is completed by a self-leveling swivel head with special hole tabs for inserting and fixing bills or beams and a screw locking ring. These steel stool bearings can reach variable heights from 27 mm to 458mm. Height adjustment is done manually by turning directly at the base.

RAW MATERIAL:
S235JR Galvanized steel

ENVIRONMENTAL IMPACT:
Recyclable material - harmless

ADVANTAGES:
Fire-resistant stool bearings
Chemically resistant stool bearings
Suitable in both indoor and outdoor environments
Slope compensation from 0 % to 5 %
Swivel head or fixed head as needed
Compatibility with aluminum rails and wooden beams

GENERAL FEATURES & PROPERTIES
27 - 458 mm
BASE DIMENSIONS mm 100X100 +/- 0.5
BASE THICKNESS mm 1.8 +/- 0.2
HEAD DIMENSIONS mm 100X100 +/- 0.5
HEAD THICKNESS mm 3 +/- 0.2
Minimum. TENSILE STRENGTH MPa 235 +/- 5
RM < 3.00 N/mm² 360 ÷ 510 +/- 5
RM ≥ 3.00 N/mm² 360 ÷ 510 +/- 5
SLOPE CORRECTION % 5 +/- 0.5
FIRE BEHAVIOR UNI-EN 13501-1:2009 CLASS "A1"
APPLICATION SURFACES:
On any compact, suitable and firm surface
SCOPE OF APPLICATION:
Can be used with any prefabricated self-supporting suitable covering element as an outdoor flooring

INSTALLATION METHOD: The product is installed dry, without adhesives, no other types of fasteners are generally necessary.