SMA 4 H61-97mm

Metallic Self-Levelling Supports SMA
Metallic support for raised floors, height-adjustable, with self-levelling head compensating slopes up to 5%.
The supports for raised floors are made of a square base in approximately 100x100 x 1.8 mm format and a screw that is manufactured from a threaded section, at the end of which a concave element is attached that serves as a seat for the head.
The self-leveling head, with 4 mm ribbing, is fitted with a locking ring.

The height adjustment from 27 mm to 458 mm is done manually by turning the thread or using a 4 mm allen wrench.

TECHNICAL SPECIFICATION
Supports for raised floors type 'SMA', height-adjustable, equipped with self-levelling head. The supports consist of a square base 100x100 mm, 1.8 mm thickness; a screw that consists of a threaded rod at the end on which a concave element is attached, which serves as a pivot point and support for the tilt head; The pedestal is completed with a self-levelling pedestal head with 4 mm joint spacers and an anti-twist safety ring. These steel pedestals can reach variable heights from 27 mm to 458mm.
Height adjustment is carried out manually by turning the threaded rod or using a 4 mm allen wrench.

RAW MATERIAL:
S235JR Galvanised steel

ENVIRONMENTAL IMPACT:
Recyclable material - harmless

ADVANTAGES:
Fire-resistant pedestals
Chemically resistant pedestals
Suitable both indoors and outdoors
Incline adjustment from 0 % to 5 %
Pivot head or stationary head depending on need

GENERAL FEATURES & PROPERTIES

27 - 458 mm

BASE DIMENSIONS mm 100X100 +/- 0.5 BASE THICKNESS mm 1.8 +/- 0.2

HEAD DIMENSIONS mm 100X100 +/- 0.5 HEAD THICKNESS mm 3 +/- 0.2

Min. TENSILE STRENGTH MPa 235 +/- 5

RM < 3.00 N/mm² 360 ÷ 510 +/- 5
RM ≥ 3.00 N/mm² 360 ÷ 510 +/- 5

SLOPE CORRECTION % 5 +/- 0.5

FIRE BEHAVIOR UNI-EN 13501-1:2009 CLASS 'A1'

APPLICATION BACKGROUND:
On any compact, suitable and solid surface

SCOPE OF APPLICATION:
Can be used with any prefabricated self-supporting suitable flooring element as outdoor flooring

INSTALLATION METHOD: The product is dry-laid, without adhesives, no other types of fixing are normally required.