TX-1250 MAX

Manual tile cutter TX-1250 MAX Ref. - 17921 EAN-13 - 8413797179217 Cutting length - 125 cm Length diagonal cut - 85x85 cm Cutting depth - 3-21 mm Power of the breaking device - 1200 kg With transport case - Weight including transport case - 26 kg Number of pieces per packaging unit - 1 Description The TX-MAX manual tile cutter series is perfect for INTENSIVE processing of all types of ceramic tiles. Thanks to the powerful MULTIPLE POINT breaker and the rotating angle system, the TX-MAX models allow simple and fast execution of angle cuts (from 0° to 45°), especially with porcelain tiles (AIa/BIa). Thanks to their high breaking force (up to 1200 kg), the TX-MAX tile cutters are excellent for processing extruded tiles and slabs. The steel pipe guides with a diameter of 30 mm, and the cutting head equipped with extra long guide slides guarantee an exceptional structural strength and give the models with the highest cutting power (TX-1020 MAX and TX-1250 MAX) maximum potential. The forward position of the cutting wheel improves the view of the scoring and cutting area. The downholder has a removable protection that allows to work on the most sensitive surfaces without the risk of leaving any processing traces. Due to the special design of the breaking device, this can be operated with just one hand and allows the lock and unlock of the downholder via a pawl mechanism. This mechanism improves the work performance of both thinner and thicker materials (from 3mm to 21mm without protection and up to 19mm with the processing protection placed on the downholder). As a complement to the flexible baseplate, the 710 and 1020 models are equipped with two additional support arms to enlarge the support surface for large format tiles. The model 1250 has 4 support arms (two on each side). All models of the TX-MAX series are equipped with a side stop for measuring and fixing narrow tile strips, two cutting wheels (8 mm and 22 mm EXTREME) and the traditional transport case. The manual tile cutters TX-MAX are compatible with the entire range of PLUS cutting wheels from RUBI. The model TX-1250 MAX is, besides the transport case, also equipped with a handle and wheels for easy transport on site. * There are some ceramic materials with a thickness of more than 15 mm, which due to their physical properties, possible internal tensions or surface coating are difficult to cut manually. It is recommended to do some test cuts to verify the suitability of the product. Product Highlights High precision scoring. Highly efficient overall system. Reinforced components. High strength. High breaking power (1.200 kg) - MASTER POWER. One-hand operation. Materials For professional cutting of all types of ceramic tiles, ideal for porcelain and extruded porcelain tiles. Properties Steel pipe guides with Ø30 mm and 2 mm wall thickness. Cutting head with long aluminium guides and self-lubricating slide bearings. Mobile breaking device with downholder of aluminium and plastic protection to avoid markings on SENSITIVE surfaces. The locking of the downholder by means of pawl and the unlocking by means of trigger allows scoring and breaking with only one hand. FASTER operation. Higher EFFICIENCY for both thinner and thicker materials. Better VIEW of the cutting area. Base plate made of die-cast aluminium, additionally reinforced by a central rib for more STRENGTH. Flexible base plate made of galvanised steel for higher CUT STABILITY. Rotatable angle system mounted on a pin. Higher PRECISION in angular cuts. With side stop for repetition cuts and for cutting narrow tile strips. Equipped with 2 additional support arms* for large format ceramic tiles. (*4 on model TX-1250 MAX). Soft persongrip handle for better ERGONOMICS and more OPERATING COMFORT. Equipped with 8 mm and 22 mm EXTREME cutting wheels. Compatible with the entire range of PLUS cutting wheels. Including transport case.