POWER RAIZOR MkII Sägeeinheit M14

• Multi-angle cutting unit in combination with the RAIZOR cutting guide.
• Cuts are carried out with the following angles: 45° (mitre cut), 90° (standard / vertical cut), 180° (side incision - cut joint / slots along the side of the tile / panel and / or edge profiles e.g 1/2 round rod).
• In addition to these positions, POWER RAIZOR also cuts at the following intermediate angles: 30° / 47° / 70°.
• Tilting motion (plunge cut) for adjusting the cutting depth, for making square and rectangular cutouts and cuts in multiple runs.
• The angle grinder is not included in the scope of delivery.
• The system is suitable for the most common brands and models of angle grinders.
• Available in versions for angle grinder spindle sizes: M14 (metric)
• Dry use (standard version) or wet use (for carrying out a wet cut in combination with the set for wet cutting and dust suppression - Art. 433PWW A, Power Raizor must be operated with a cordless / battery-operated angle grinder). The cordless angle grinder requires the protection type IP54 * or higher).
• Includes a connection for connection either to the dust extraction or to the kit for wet cutting and dust suppression (Art. 433PWW A).
• Cutting depth (thickness): 20 mm (0.78 inches) at 90°, 16 mm (0.63 inches) at 45° and 180°.
• It comes with a turbo blade with a diameter of 125 m (5 inches), a user and maintenance manual.
* Safety regulations can vary from country to country. Therefore, it is highly recommended to inform yourself & comply with the applicable laws of the country in which the product is used.