Cimsec Marble & Granit Trass Flex

High flexibility and high adhesive strength for more safety reserves
Recommended for large format tiles
Specially designed for easily deformable surfaces
Variable adjustment for wall and floor
For all tiles and slabs, natural and artificial stones
For terraces, facades, swimming pools
Water and frost resistant, for indoor and outdoor

Highly deformable, cementitious, light gray thin-bed adhesive mortar for increased requirements, with extended open time

Highly flexible and high adhesive strength for more safety reserves
Recommended for large format tiles and slabs
Especially for easily deformable surfaces
Variable adjustment for wall and floor
For all the tiles, natural and artificial stones
For terraces, facades, swimming pools, dry lines and P5 chipboard
Water and frost resistant, for indoor and outdoor
Application:
For laying wall and floor coverings in indoor and outdoor use. To ensure a flexible adhesive bed and to avoid shear stresses on critical surfaces. For repair and leveling revisions before laying on an uneven surface to about 10 mm.

Material:
For tiles of different thickness of:

Earthenware, stoneware, porcelain,
Mosaic, terracotta, glass tile
Extruded, rough-cut foam panels
Lightweight, insulating and insulating
Natural and artificial stone (non-staining, moisture-resistant, non-fattening, such as marble, granite)
Concrete slabs

In normal construction background WALL:

Lime-cement and cement plaster, at least 14 days old
Concrete and precast concrete products (at least 3 months old)
Concrete over 18 months old, at least out to 85% disappeared
Gypsum Plaster (residual moisture CM = 1%)
Plasterboard, fibrous plaster and plasterboard sections (with primer or alternative sealing)
On CIMSEC sealing Flex and 2-K seal

In normal construction background SOIL:

Cement-based composite flooring, at least 14 days old
Floating cement floor without a floor, minimum 28 days old, moisture content = 2.5% CM
Calcium sulfate screed (anhydrite) without floor heating (with primer or alternative sealing)
Asphalt without thermal stress, inside, sanded (GE 10, 15, 40), minimum age 8 days (no commercial use)
On CIMSEC sealing Flex and 2-K seal

On SPECIAL UNDERGROUND walls and floors

Screeds with integrated hot water heating
Tile on existing tiling (with bonding)
Fiber cement boards (for example, asbestos)
Particleboard with tongue and groove P5, dry indoor
OSB wooden boards (on request only - see note)
Dispersion paints (water-resistant and adherent)
Cut, rough sawn, extruded polystyrene boards (XPS-R)
Gas concrete (Ytong, Siporex, lever) disappeared out at least 85% (with primer)
Terrace, balcony, facade
Swimming pools indoor and outdoor
Very young screed and concrete (only on request)

Usage:
About 1.1 to 1.18 kg / m² powder with 1 mm thickness

Packaging:
20 kg bag

Technical data

Quantity required for comb trowel with teeth:
6 x 6 mm approx 3.07 kg / m²
10 x 10 mm approx 4.21 kg / m²
Middle bed: about 5.12 kg / m²
Mixing ratio (water use)
Wall coverings (stable): 5.5 kg Liter/20
Flooring (Fluid Bed consistency): 6.5 kg Liter/20
Specified values: At +20 ° C temperature and 65% humidity
Ripening time (dwell time): 5 minutes
Pot life: 3 hours
Open time (adhesive mounted): up to 40 minutes
Correction time: about 5 to 20 minutes
Foot traffic (availability) for: 12 hours
Fully cured after: about 7 days
Thickness: 10 mm
Shelf life: 12 months